[a]https%3A%2F%2Fwww.cicemech.com%2Fproducts%2Fintelligent-mechanical-equipment%2F[/a] <br>#mechanical #arm <br>With the development of modern science and technology, industrial arm is a kind of high-tech automatic intelligent mechanical production equipment developed in recent decades. In the modern production process, Arm robots are widely used in automatic production lines, the research and production of robotic arm machine has become a new technology rapidly developed in the field of high technology, to better realize the organic combination of mechanization and automation, the mechanization and automation organic combination will be better achieved. The biggest difference between the robot arm and the human arm lies in its flexibility and endurance. The biggest advantage of the automatic manipulator is that it can do the same action repeatedly without fatigue. Therefore, industrial arm robot has been paid attention to by many industries and has been used more and more widely. <br> <br>The heavy equipment and machinery of CIC mainly refers to the automatic robot arm control equipment used in smelting industry metallurgy which has the function of imitating human arm and can complete various operations. This robotic arm machine operation system has multiple joint connections and joints allowing movement in plane or three-dimensional space or using linear displacement movement. The structure is composed of a mechanical body, a controller, a servo mechanism and an inductor, and the program can set certain specified actions according to the operation requirements. The operation of the industrial arm robot is driven by electric motors that move an arm, open or close a clip, and accurately feed back to a programmable logic controller. This automatic device mechanical to complete the &quot;wrist and hand&quot; movement as the main purpose, the machine can be repeated in accordance with the program to complete the correct and regular operation for countless times after its sequence is entered by a skilled operator. <br> <br>Function of Intelligent Furnace Robotic Arm Machine <br> <br>An important part of a closed calcium carbide furnace is robot arm control production. <br> <br>The automatic discharge system of the calcium carbide furnace is controlled to complete the connection between the discharge system of the furnace opening, discharging and sealing of the furnace hole and the boiler handling system. <br> <br>High temperature, dangerous and labor-intensive operation work will be replaced by the controlled machine and operate remotely. <br> <br>Stable working and digitized working processes can greatly improve the production stability of the furnace. <br> <br>Technical Characteristics of Furnace Robotic Arm Machine <br>Remote Operation <br> <br>The operators complete all the operations in the central control room or operation room without being on site. It will greatly improve the working environment, reduce labor intensity, eliminate personal safety hazards. <br> <br>Digitalization of Working Process <br> <br>In the process of operation, the system will have real-time digital signals for different working processes. It is beneficial to unify the working process of different operators, to stabilize the outlet channel of calcium carbide furnace, and to reduce the deposition of furnace bottom. <br> <br>Standardization of Process <br> <br>Different standard work clamps are used to finished the operation process of the furnace. The work process is standard and does not need the on-site experience of workers, which greatly improves the replaceability of operators. The standardization of the working process also improves the efficiency of work, which is conducive to reducing power consumption. <br> <br>There are many robotic arm manufacturers, but we are one of the best choices for you. <br> <br>As one of the most professional heavy equipment manufacturers, CIC has high-quality centrifuge machine for sale. Welcome to contact us if needed.

[a]https%3A%2F%2Fwww.cicemech.com%2Fproducts%2Fhorizontal-centrifuge%2F[/a] <br>#horizontal #centrifuge <br>TWZ series horizontal vibratory centrifuge belongs to the centrifugal dewatering machine, the series of horizontal vibratory centrifuge is mainly used for dehydration of fine and medium coal (0.5 to 26mm), it can also be used for other similar materials dehydration. <br> <br>Structural Features of Horizontal Centrifuge Machine <br>The horizontal vibratory centrifuge made the material separated by solid liquid on a high-speed rotating screen, a vibrating power is attached to the material on the screen by the excitation system to realize the solid-liquid separation with automatic unloading. The TWZ series has many advantages, including high production, small crushing degree, long life period of screen, stable, convenient to fix, simple structure, low noise, high reliability and low cost. <br> <br>Main Features of Horizontal Centrifuge Machine <br>Industrial centrifuge machine has high treatment ability, good dehydration effect. <br> <br>Small crushing degree, the screen basket is more wearable, long life period. <br> <br>TWZ series have inertial resonance vibration system, amplitude and product rate are stable and reliable. The TWZ vibration system has the advantages of smooth running, low noise, simple structure, convenient maintenance and energy saving. <br> <br>Horizontal centrifuge machine can be applied as coal centrifuge and sludge dewatering centrifuge. <br> <br> <br>Working Principle of Horizontal Centrifuge Machine <br>Materials entered into the bottom of the screen basket through a feed-in tube with an enamel and screen base, materials within the screen barrier subjected to centrifugal force and closed to the screen surface. Under the effect of vibration, the material layer moved toward large end of screen basket evenly, the dehydrated material was thrown around the screen basket, falling into a discharge port at the bottom of the shell and discharged. The moisture in the material through the material layer and the sieve seam was thrown around the shell under the action of centrifugal force, then along the shell wall to the drain outlet. <br> <br>There are many heavy equipment dealers, but we are one of the best choices for you.

[a]https%3A%2F%2Fwww.cicemech.com%2Fproducts%2Fvertical-centrifuge%2F[/a] <br>#vertical #centrifuge <br>The vertical centrifuge machine is made up of the screen which diameter range from 700 to 1,000 mm , the rotor body (including the blade), transmission, body, lubrication system, etc. <br> <br>Application of Vertical Centrifuge Machine <br>The vertical centrifuge is fit for material dehydration, generally used for coal, salt and other materials. Our coal centrifuge has helped a lot of customers with their industrial projects. <br> <br>Working Principle of Vertical Centrifuge Machine <br>Wet materials are feed into the mouth of industrial centrifuge machine, then are accelerated by the rotated distribution cone and move rapidly towards the space between screen and rotor. With the centrifugal force, the smaller particles of material get closed to the screen surface, liquid and part of the particle size of less than 0.5 mm of material get across the material space and screen gap, then are thrown out of the screen, the larger particles of materials soon slipped into spiral nesting mouth along the screw blade with the action of gravity and centrifugal force fine material attached to the screen surface are discharged by the scraper centrifuge through blade action, while the liquid through the screen and fine materials are thrown into the water tank then outflow through the drain, so as to achieve a solid-liquid separation. <br> <br>Installation and Testing of Vertical Centrifuge Machine <br>When the centrifuge is assembled completely in the manufactory, the test should be carried out in air operations. It should be sent out to the users in the form of machine after it is up to the requirements, the users can directly follow the steps to install the equipment when they get receipt of it. <br> <br>1. Installation Step <br>1) Check whether the basis of surface is level, if it is uneven, adjust the leveling pad. Check the ground pin-hole size and pore size of the centre. Check whether the basis of elevation to meet the requirements. <br> <br>2) Mount the shock absorber to the ground pin holes, install the nut first but not tightened until the machine is in the right place, then solid-tight. <br> <br>3) Hoisting the machine in the place, tighten anchor bolts, tighten the upper pairs of nuts before the measurement with the caliper pad diameter, it is required that the diameter of compact size should be increased 2~3mm than the first fasten one. <br> <br>2. Test Step <br>1) Checked before testing items <br>a. All bolts connections should be tighten. <br>b. There is no equipments which have effects on the machine operation. <br>c. Make sure the pulley can be moved with both hands so that the machine can be rotated flexibly with non-stuck and abnormal noise. <br>d. Make the belt hang right. <br>e. Indicator within the oil tank should be located in the groove between the upper and lower limits. <br> <br>2) Commissioning and inspection of the project <br>Meet the above requirements, follow these steps, and start running in the air for 8 hours. <br>a. Open the oil pump motor. <br>b. Observe the oil supply situation, make sure everything is ok, open the console. <br>c. While there is no abnormal noise, stable operation, measure the amplitude of the centrifuges in the horizontal plane and make sure that it is less than 0.3mm. <br>d. Measure the oil temperature every 30 minutes, ensure the oil temperature rising is no more than environmental temperature-30℃. <br> <br>3) Loading Test <br>When all functioning of the machine working in the air is normal, then gradually feeding at the same time pay attention to the functioning of the device, while there is no abnormal phenomenon, the handling capacity can be increased to 150~200t/h, the handling capacity of the material easily dehydrated can be larger, difficult to dehydration material handling capacity can be smaller. Add enough materials, it may take the measurement as the following items, when all meet the requirements, the equipment can be put into use. <br> <br>a. Checked by commissioning and inspection items <br>b. Measuring capacity <br>c. Moisture measurement products <br>d. Measurement original compound, the content of grain size of less than 0.5mm <br>e. Measurement of centrifugal fluid solids <br>f. Measuring power consumption <br>Operation and Maintenance of Vertical Centrifuge Machine <br>1. Operation <br> <br>1) Pre-drive checks <br>a. Check the machine whether in full state and the connectors are loosening. <br>b. Check whether the material plug the machine and the oil spill out of the pipeline. <br>c. Moving the pulley, check whether the machine is resisted and the belt tensioning situation. <br>d. Check whether the oil level inside the tank between the upper and lower limits of the oil indicator, enable the pipeline junction leakage are prohibited. <br> <br>2) Driving <br>a. Activate the pump motor, to observe the oil flow table. After the oil flow through 1~2 minutes, then start the main motor. <br>b. When the machine is running in the normal condition, begin to feed, the charging capacity should be gradually increased. <br> <br>3) Parking <br>a. Stop feeding, get the closure of the host after 2~3 minutes. <br>b. Shut main motor down after half a minute, and then close the pump motor. <br> <br>2. Maintenance <br>Centrifuge normal maintenance plays an important role in preventing accidents and injury in the weight of link components in the device’s using, and the systems should be required to perform. <br> <br>1) Lined lid is easy to wear and tear, open the lid or observe the lid abrasion situation from the observation hole, if the abrasion is serious, it should be replaced promptly. <br> <br>2) Distribution cone is mounted on the top of the rotor body, contacted with material directly and easy to wear and tear. Every time when you change the screen and scraper, pay attention to check the distribution of the remaining tapered wall thickness, if it is too thin, take replacement timely. <br> <br>3) Screen is the key part of the centrifuge, it is forbidden that there is no wire, wood, bolts and debris in the machine while it is used. For a long time using, if a little screen surface was damage, it allowed to be repaired by welding, but if the gap in the screen is as large as 0.75 mm wear or screen seriously worn, the screen should be replaced. Likewise, if the mesh repair welding area is too large, re-do before the use of dynamic balance. <br> <br>4) Spiral scraper, it should be paid attention to adjust the gap between blade and the screen surface when it is working, usually 0.3~1.5 mm. If the gap is too large, it can mount the adjustment pads on the top of the rotor body underside for each additional pad, the gap decreased 0.34 mm. If the adjustment of all cushion mount to the lower part, the gap remains large, replace the blade. It should pay attention to the pairs of containers while changing scraper, mount the weight of two scraper into a symmetrical position to keep the rotor body balancing performance. After replacement of the scraper, the machine should be conduct and test run in the air operation. If the rotor vibration is too large, it would have to do the rotor body balancing. <br> <br>5）Export the protection lining, materials get through the lower scraper with the influence of centrifugal force, the material is left out in the protection of lining, and then fall until the belt exit cone machine, it should pay attention to the protection liner wear circumstances from the hole observed when it is used. When serious damage happened, replace it timely. <br> <br>6) The export cone is at bottom of the machine, when material falls, the cone inner surface is often worn in use, and the lining should be checked regularly. If there is some damage, it must be promptly replaced. <br> <br>7) The differential is a driving part of the machine, it should be aware of the lubrication conditions when it is used. It should pay attention to whether the oil is spilled, oil flow table is oil flow and the differential pulley-side and the upper part of bell-shaped cast-side sealing department have leaked oil. Enable that there is not any unusual noise in the working differential. <br> <br>8) Lubrication system. It should be always checked the oil spill situation, pressure gauge and oil flow sheets. Oil filters in the filter and the oil tank strainer should be periodically cleaned or replaced. The oil level in the fuel tank must be within the upper and the lower limits shown in the table. <br> <br>9) Cleaning the materials inside the machine regularly, rinsing the materials between the hood and lining surplus with red bell-shaped water, cleaning the appearance of the machines and the places around the equipment, make sure it is working in good condition. <br> <br>As one of the most professional heavy equipment companies, CIC has high-quality sludge dryer for sale. Welcome to contact us if needed.

[a]https%3A%2F%2Fwww.cicemech.com%2Fproducts%2Fsag-mill%2F[/a] <br>#semi #autogenous #grinding #mill <br>Semi autogenous mill or SAG mills as they are often called, can perform grinding operations equivalent to two or three stages of crushing and screening. SAG mill are characterized by their large diameter and short length as compared to ball mills. The inside of the mill is lined with lifting plates to lift the material inside the mill, where it then falls off the plates onto the rest of the ore charge. SAG mining are often used as industrial grinding mill of modern concentrators, which can directly produce particle size of finished products or prepare feed materials for the downstream grinding sections. <br> <br>Introduction of Semi Autogenous Grinding Mill <br>Like ball mill and rod mill, SAG mill also belongs to horizontal placed cylinder grinding equipment, the working principle is basically the same, which by means of processed material itself (or add a small amount of medium) in the simple body of continuous impact, rolling grinding and make the material crushing. The filling rate of steel ball in the shell of the semi-autogenous mill is a main item to distinguish SAG mill and autogenous mill. In order to eliminate the impact of the accumulation of rock, the autogenous mill allows to add about 3% of the ball (Φ80 ~ Φ120), SAG mill steel ball filling is generally 8% ~ 12%, even up to 15%. <br> <br>Advantages of Semi Autogenous Grinding Mill <br>Reduce Lifetime Costs <br>The full range of specifications and wide range of applications enable SAG mills to perform grinding operations with fewer configurations than conventional mills. This helps to reduce the investment and maintenance costs of the SAG mill circuit. <br> <br>Wide Application <br>The scope of application is wide due to complete specifications of SAG mill. The semi-autogenous mill can be equivalent to two or three stage crushing and screening, rod mill, and part or all of the ball mill grinding operation effect. <br> <br>SAG mill is also the best solution for wet grinding. In this regard, the crushing and screening process is difficult to complete. <br> <br>Efficient Automated Operation <br>From circuit design to operation and optimization, our process experts help you create an efficient heavy equipment and machinery automated process that ensures the grinding results you expect. <br> <br>Through automatic operation, electricity can be saved, grinding medium and liner consumption can be reduced while increasing production capacity. <br> <br>Intelligent Grinding Expert System <br>Unique grinding expert system can comprehensively monitor the real-time operation of the SAG mill, grinding status, and material parameters. Through computer control system, make the man-machine interaction effectively, save manpower and improve accuracy and capacity. <br> <br>Learn more about the Intelligent Grinding Expert System <br>According to professional data sources, by far the largest SAG mill is 42&#039; (12.8m) in diameter, powered by a 28 MW (38,000 HP) motor. While CIC is currently capable of manufacturing SAG mills with a maximum diameter of 21&#039; (6.5m) <br> <br>There are many heavy equipment suppliers, but we are one of the best choices for you.

[a]https%3A%2F%2Fwww.cicemech.com%2Finstallation-and-commission-of-customized-and-intelligent-heavy-machinery%2F[/a] <br> <br>#ball #mill #installation <br> <br>CIC has its own installation and commissioning team, which avoids the trouble incurred by the equipment production line-owner finding the installation and commissioning engineering team by themselves. No matter where you are in the world, we will go to the site to provide ball mill installation and kiln installation for you. In addition, because our equipment is designed, manufactured, installed and debugged as a whole, we are most familiar with our own equipment and the whole installation and debugging process, which can greatly improve the ball mill installation and kiln installation efficiency, ensure the ball mill installation and kiln installation quality and let customers worry-free in the whole process. <br> <br>Installation And Commissioning Site Of Ball Mill <br> <br>Take the ball mill machine as an example, the installation and commissioning requirements of the ball mill equipment are very strict, and the ball mill installation needs to be carried out in strict accordance with the drawings and requirements of the ball mill equipment manufacturer. Once problems occur in individual places, it will form a chain reaction problem to the whole ball mill production line, such as causing the ball mill product size can not meet the requirements, or even reducing the metal recovery rate. If in order to reduce the ball mill installation cost and choose the general ball mill equipment installation engineering team, the latter is likely to have irreversible problems with the equipment. Therefore, the selection of an ball mill installation team with formal qualifications and rich ball mill installation experience is the key to ensuring the stable operation of the ball mill and realizing efficient production.

[a]https%3A%2F%2Fwww.cicemech.com%2Finspection-and-maintenance-of-customized-and-intelligent-heavy-machinery%2F[/a] <br> <br>#mill #inspection <br> <br>CIC has a complete technical inspection and maintenance team. Before the equipment is delivered, we will carry out mill inspection and kiln inspection according to the requirements of customers to ensure the quality of products. After the equipment is delivered, in addition to going to the site for installation, we will also train for the clients&#039; operation and maintenance. <br> <br>Mill &amp; Kiln Inspection and Detection <br>In order to guarantee the quality of the industrial grinding mill, CIC insists on implementing strict testing on each of the ball mill machine and accessories. The advantage of CIC&#039;s testing is based on: <br> <br>Experienced Testing Stuff <br>CIC has more than 200 engineering technical staff, 6 of which are senior engineer and 59 are Engineer. Among all these engineering and technical staff, tens are professional quality control staff, taking charge of the testing of the products for years, to make sure each of the overflow ball mill, wet grid ball mill and dry ball mill confirms to the standard requirement of the technical agreement and so on. <br> <br>As one of the most professional heavy equipment manufacturers, CIC has high-quality centrifuge machine for sale. Welcome to contact us if needed.

[a]https%3A%2F%2Fwww.cicemech.com%2Fcic-customized-and-intelligent-equipment-in-waste-treatment.html[/a] <br> <br>#dry #ball #mill <br> <br>The waste evaporates, sublimates and organic waste is decomposed by microorganisms to release harmful gases to pollute the atmosphere; The fine particles and powders in the waste drift with the wind and diffuse into the air, causing dust pollution of the atmosphere; In the process of waste transportation, storage, utilization, treatment and disposal, harmful gases and dust are produced. Hazardous waste may cause toxicity through ingestion, inhalation, skin absorption, and eye contact, or cause dangerous events such as combustion and explosion; Long-term hazards include long-term poisoning, carcinogenesis, teratogenesis, and mutagenesis caused by repeated contact. <br> <br>Hazardous waste will do harm to society, the environment, and people, so it must be treated innocuously. At the same time, many private factories do not have the qualification and ability to deal with hazardous waste, so they must entrust the units with the qualification to deal with hazardous waste approved by the state. This is responsible for the environment and the safety of everyone&#039;s life. The following is the application of our equipment in two hazardous waste treatment methods. <br> <br>Incineration furnace is a comprehensive process of solid waste decomposition at high temperatures and deep oxidation. The advantage is that a large number of harmful wastes are decomposed into harmless substances. Because the proportion of combustible materials in solid waste increases gradually, the incineration method is used to treat solid waste, and it has become a necessary trend to use its heat energy. In this way, solid waste occupies less land and has a large amount of treatment. The incineration plant is equipped with an energy recovery system. The heat obtained from incineration can be used for power generation, etc. <br> <br>Our cement rotary kiln incineration system can handle industrial waste, medical waste, chemical waste, polluted soil and radioactive waste. Moreover, we have developed a new hazardous waste incineration system in the waste treatment field. This system is a new generation of environmental-friendly incineration systems developed by using the latest research results. Compared with traditional incineration technology, this system can fully meet stringent environmental regulations in the future.

[a]https%3A%2F%2Fwww.cicemech.com%2Fcic-customized-and-intelligent-equipment-in-metallurgy.html[/a] <br> <br>#metallurgy #rotary #kiln <br> <br>Metallurgy refers to the process of extracting metal or metal compounds from ore or other raw materials and making metal materials with certain properties by various processing methods. It includes a series of production departments, such as mining, beneficiation, sintering, coking, refractory, iron making, steel making, rolling, and other auxiliary departments such as transportation, machine repair, and power. <br> <br>CIC mining heavy machinery also manufacture metallurgy rotary kiln, which are professionals in processing different material, such as nickel iron rotary kiln, alumina rotary kiln and lime rotary kiln. Check if you have any interests. <br> <br>Blast metallurgical furnace iron making is the main method in modern ironmaking present. Blast metallurgy furnace smelting is a continuous and large-scale high-temperature production process. Iron ore, flux, and coke are transported from charging equipment to furnace top according to the determined proportion and then loaded into the furnace in batches by charging equipment on the top of the furnace, and hot air of 1000-1300 &lt;℃ is blown from tuyere to blast furnace, which makes a series of physical and chemical changes in the furnace, and finally liquid molten iron is generated. CIC can design and produce all kinds of vertical or horizontal converters below 120 tons and mixer furnaces with less than 900 tons. <br> <br>120T Converter <br>So-called steel making is to reduce the carbon content and remove harmful impurities in pig iron by smelting, and then add appropriate alloy elements according to the requirements of steel properties, so as to make it steel with high strength, toughness, or other special properties. <br> <br>In the total production of steel, more than 90% of the steel is made by rolling except for a small part of the steel produced by casting or forging. Our company produces the related machinery in the process of binding, such as rolling mill, tubing straightening machine, cooling bed and flying shear, etc., which can meet the different needs of the rolling process.

[a]https%3A%2F%2Fwww.cicemech.com%2Fcic-customized-and-intelligent-equipment-in-fertilizer-and-granulation.html[/a] <br> <br>#fertilizer #granulator <br> <br>Fertilizer is a natural or synthetic nutrient element necessary for the growth and development of one or more plants. About 30% to 50% of the increase in crop yield is attributed to natural or inorganic chemical synthetic made by commercial fertilizer granulator and fertilizer cooler. Fertilizers can be divided into inorganic fertilizer and organic fertilizer according to their composition. Inorganic fertilizer, also known as chemical fertilizer cooler or synthetic fertilizer, includes two sub-industries, simple fertilizer and compound fertilizer. It is usually made from non-organism, inorganic compounds, and minerals. Inorganic fertilizer is generally made of minerals, synthetic materials, or materials after the burning of animals and plants. Its forms include liquid, powder, particle or rod, etc. Organic fertilizer, also known as natural fertilizer, presents in the state of organic matter and is formed by the natural decay of organic matter in organisms. The industrial organic fertilizer includes mixed coating, seaweed extract, etc. <br> <br>Whether it is inorganic fertilizer or organic fertilizer, we can provide you with the key equipment in the configuration of the fertilizer production line, as well as the fertilizer-making equipment for the harmless treatment of organic wastes such as organic-inorganic fertilizer, garbage, sludge, etc. <br> <br>Fertilizer Granulator And Fertilizer Cooler <br>In the production line (configuration granulation part), our main advantage lies in the granulator, rotary dryer machine, cooler research, and production. The granulator cylinder we produced is lined with a special rubber plate or acid-resistant stainless steel plate instead of the traditional scraper device, which realizes automatic scar removal and tumor removal. The reasonable operation parameters are selected to solve the balance problem of &quot;coal, material, and air&quot;, improve the thermal efficiency of the industrial rotary dryer, and reduce the energy consumption by more than 30-50%. We can make a cooling machine with a maximum size of 3x30m, the cylinder of the cooler is a spiral tube, which has high concentricity, strong rigidity, and smooth operation. We are always committed to reducing energy consumption, fully combining the best in engineering and manufacturing, and producing excellent fertilizer treatment equipment for the whole world. We guarantee that each piece of equipment is custom engineered to the process requirements for heavy machinery services.